







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Kendale Lakes Homeowners Choose PGT Construction
We provide independent PGT service in Kendale Lakes, FL: impact window and door installation, window replacement, and the roof repairs that so often go hand in hand with opening upgrades on older CBS homes. What sets our PGT work apart is familiarity with the specific failure points these products develop in South Florida’s climate – failed insulated glass seals, corroded hardware, laminate edge breakdown, and water finding its way in around frames and weep holes. We are an independent contractor, not affiliated with or authorized by PGT. Our technicians have up to 10 years of experience. Call (866) 531-4751 to schedule a free estimate in Kendale Lakes.

Why Trust Kendale Lakes Construction for Your PGT Construction?

PGT builds impact-rated windows and doors, and that shapes how they fail and how they must be serviced. An impact unit is a system – laminated glass, a sealed insulated glass unit inside it, a frame engineered to a specific wind load, and hardware that has to keep the sash tight against that frame. Get one piece wrong on a Kendale Lakes home and you lose the protection the product was bought for.
Our technicians know these assemblies. We understand why a WinGuard unit fogs, why the aluminum series hardware pits in salt air, and why a vinyl series frame that was fine for years can start letting wind-driven rain past a weep hole that’s clogged with stucco dust and debris. We service PGT equipment with quality parts that fit it, and we work in a way that keeps the unit’s rating and warranty intact rather than quietly compromising both.
That matters more in Kendale Lakes than in most places. Miami-Dade’s product-approval system means the window and door assemblies on these homes carry a county approval that a mismatched replacement part can undercut. We treat that as a line we don’t cross. Every recommendation we make is one we’d defend at inspection.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Kendale Lakes
Most of what we’re called to on PGT units in Kendale Lakes falls into a handful of patterns. Here’s what they look like and why they happen.
- Fogging between the panes. A milky haze inside an insulated glass unit is a failed perimeter seal. Once moisture gets into the sealed cavity, the desiccant is spent and no amount of cleaning brings the glass back. It’s the single most common PGT complaint on 1970s-1990s homes where original windows have been in place through years of UV and humidity.
- Corroded hardware and fasteners. South Florida’s salt-laden air attacks locks, hinges, handles and the screws holding them. A handle that won’t latch is a security and wind-load problem, not cosmetic. We see it most on units facing open exposure, and it’s worth checking hardware at the same time as the glass.
- Impact glass laminate delamination and edge seal breakdown. The laminated layer in impact glass can separate or break down at the edges over time, especially where UV exposure and heat cycling are constant. When that happens the unit may still look intact but has lost the performance it was approved for. This is the failure owners often miss.
- Water infiltration through frames and weep holes. Wind-driven rain during the June-November season finds every gap. Improperly sealed frames, failed perimeter caulking, and weep holes packed with debris let water into the wall cavity rather than draining it out. On CBS homes with stucco exteriors, that shows up as staining, cracked stucco and mildew long before it shows up inside.
- Sticking or hard-to-operate sashes. Settling frames, worn rollers on sliding units and swollen tracks make a window hard to close fully – which means it isn’t sealing when a storm comes. On older homes in these western subdivisions, this often traces back to movement in the opening itself, not just the unit.
Roof ties in with all of this. A window replacement on a Kendale Lakes home often surfaces roof-to-wall and flashing issues that need a roof repair before the opening work is closed out. We handle both under one contractor, so the two trades don’t leave a gap for water to use.
PGT Parts & Our Repair-vs-Replace Approach

For critical components – glass, and the hardware that keeps a unit sealed and secured – we use OEM parts to maintain warranty compliance and the unit’s rated performance. For non-structural items where availability or cost is a concern, we may recommend quality aftermarket alternatives, and we’ll tell you plainly why. We don’t pretend every part has to be the most expensive one.
The repair-or-replace call comes down to the age and condition of the unit. A fogged insulated glass unit on a frame that’s still sound is usually a glass replacement. The same fog on a frame that’s corroded, out of square or leaking at the sill is a different conversation. We lay out both paths, what each costs, and what it means for your home’s impact rating, then let you decide.
Call (866) 531-4751 for a free written estimate. Estimates are free, and the written quote sets the final price.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We inspect the unit, the frame, the perimeter seal and the surrounding wall or roof assembly. On impact glass we check for laminate and edge seal condition, not just what’s visible through the pane.
- 2
Plan and estimate. You get a written line-item quote covering parts and labor, with the repair-versus-replace options spelled out.
- 3
Repair or installation. Glass, hardware and frame work done to keep the unit’s wind-load and impact performance intact, with correct flashing, sealing and weep hole function restored.
- 4
Testing. We check operation, latch engagement and drainage, and confirm the seal is watertight before we call it done.
- 5
Warranty-safe handoff. We document what was replaced and how, so the work stands behind the unit’s coverage rather than creating a reason for a claim to be denied.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Kendale Lakes
We service and install PGT impact windows and impact doors, including the WinGuard impact window and door lines, the PGT aluminum series and the PGT vinyl series. That covers sliding glass doors, single-hung and fixed units, and the replacement windows that are the workhorse of Kendale Lakes upgrades. We handle glass and hardware replacement on existing units and full installation of new ones. On any opening, we confirm the assembly meets Miami-Dade’s product-approval and wind-load requirements for the home before it goes in. If a roof repair is needed where the opening meets the roof or wall, we take care of it as part of the same scope.
We Also Service These Brands
PGT is one line in a much bigger roster. We work with 50+ name-brand manufacturers across every category – KraftMaid cabinetry, Kohler fixtures, GAF roofing, Master Halco fencing, and many more. That breadth means we can give you a straight, informed comparison instead of steering you to the one brand a single-trade contractor happens to carry. Tell us your project – we’ll build the roadmap across all seven of our service lines.
FAQs – PGT Construction Service in Kendale Lakes

Is Kendale Lakes Construction authorized by PGT? No. We are an independent PGT service provider. We install and service PGT equipment, but we are not a PGT dealer, not factory-trained or certified by PGT, and not affiliated with or authorized by the manufacturer. Call (866) 531-4751 for a free estimate.
Do you use quality parts that fit PGT equipment? Yes. We use OEM parts for critical components like glass and hardware to maintain warranty compliance, and quality aftermarket alternatives for non-structural items where that makes sense. We’ll always tell you which is which.
How long does PGT service take? A single glass or hardware repair is typically a short visit; a full impact window installation across a home is a scheduled multi-day project. We’ll give you a realistic scope and schedule with your written estimate. Call (866) 531-4751 to get started.
What kinds of PGT products do you cover? PGT impact windows and impact doors, including the WinGuard impact window and door lines, the aluminum series and the vinyl series – glass and hardware replacement, frame and weep hole repair, and full installation.
Will service void my PGT warranty? Properly done service using OEM parts for critical components is designed to keep the unit’s warranty intact, not void it. We document what we replace and how, so your coverage stands.
How much does PGT construction cost in Kendale Lakes? Typical estimated ranges below; the written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
| Roof Repair | $400 – $1,800 |
Call (866) 531-4751 for an exact quote – estimates are free.
Book Your PGT Service in Kendale Lakes, FL
Fogged glass, a door that won’t latch, water where it shouldn’t be – we know PGT units in Kendale Lakes and how to get them right. Call (866) 531-4751 to schedule your free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Kendale Lakes Construction.












