







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across The Crossings
If you live in The Crossings, you already know what a few seasons of South Florida weather do to a fence. We install wood, chain link, vinyl, aluminum, and iron fencing throughout this community, and we build every run to the wind-load and permitting requirements that apply here. That matters more than it sounds: The Crossings was built as a master-planned community largely in the 1980s and 90s, and whole blocks of fences from that era are now failing at their posts at the same time. We know the subdivision pattern, we know the inspection process, and we plan the work around both. Call (866) 531-4751 to schedule a free estimate.
Why The Crossings Homeowners Call Kendale Lakes Construction for Fence Installation

Kendale Lakes Construction is a full-service residential construction company, not a fence-only outfit that disappears when the job gets complicated. Fence installation is one of seven service lines we run, alongside driveways and pavers, roofing, windows and doors, kitchen and bathroom remodeling, and home additions and ADUs. When a fence project runs into a drainage problem or a property-line question, we’re already equipped to handle it.
Our technicians have up to 10 years of experience, and they work with a curated roster of more than 50 manufacturer brands across every category. That means you’re choosing between verified, name-brand materials at multiple price points rather than a single take-it-or-leave-it spec. We’re licensed, and every quote we hand you is a written, line-item estimate. The final price is set by that written estimate, so there are no change-order surprises once the work starts.
For The Crossings specifically, our familiarity with the housing stock is a real advantage. We understand that this community’s Mediterranean-style homes were built to a specific era’s standards, that the original fences rarely met the wind-load requirements now expected here, and that the limestone bedrock and high water table complicate post footings more than in neighborhoods with deeper soil. That knowledge shapes how we plan every project in The Crossings, from a single privacy fence replacement to a full perimeter run.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Fence Installation Services in The Crossings
We handle the full range of residential and commercial fencing in The Crossings, from a straightforward privacy fence to gates and commercial-grade runs. Here are the services we install most often in this community.
Wood Fence Installation
Wood remains the most requested fence type in The Crossings, and it’s also the one most likely to be a replacement job. Many homes here still have 1990s-era wood fencing that’s started to lean after the seasonal rains. We install treated wood fencing with posts set to the depth the site’s exposure requires, and we build in the drainage clearance this soil needs so the base isn’t sitting in water. A quality wood fence here is a real investment, and it’s built to last when it’s installed correctly from the footing up.

Vinyl Fence Installation
Vinyl is a strong fit for The Crossings because it handles the intense sun and heavy rain without the rot that eventually takes wood. A typical vinyl fence installation in The Crossings runs $3500 – $9000, depending on run length, height, and style. We work with brands like Bufftech and ActiveYards, and we specify products rated for the wind exposure here so panels hold up through storm season rather than blowing out at the first strong gust.

Aluminum Fence Installation
Aluminum fencing suits The Crossings homes that want a defined property line without a solid visual barrier. It’s durable, low-maintenance, and it takes the local wind load well when the posts are set correctly. A typical aluminum fence installation in The Crossings runs $4000 – $10000, based on height, spacing, and gate count. We install aluminum from Jerith and Barrette, and we coordinate the permit and inspection steps that go with it.

Chain Link Fence Installation
Chain link is the practical choice for larger yards, side-lot enclosures, and budget-conscious projects in The Crossings. We install galvanized and vinyl-coated chain link, and we set posts to proper depth so the run stays true rather than sagging after the first wet season. If you’re securing a yard or fencing a utility area, this is the most cost-effective way to do it.
Trusted Brands We Service in The Crossings
We work with a curated roster of more than 50 manufacturer brands, and for fencing that means real choices across vinyl, aluminum, and ornamental lines. In The Crossings we install Bufftech and ActiveYards vinyl, Jerith aluminum and ornamental fencing, and Barrette products for both vinyl and aluminum runs. We don’t stock parts or keep a yard of inventory; instead, we specify the right product for your job and order it to the project. Because we’re working from a broad brand roster rather than a single preferred vendor, you get verified quality options at multiple price points. Tell us your project and we’ll build the roadmap: material, spec, permitting, and inspection, all in one written estimate.
See the difference
Before
After
Before
After
Before
AfterCommon Fence Installation Problems We See in The Crossings Homes
Fencing in The Crossings has a few recurring failure points that show up again and again across this community. Here’s what we run into most.
- Posts set too shallow in limestone bedrock. The hard bedrock and high water table here make it difficult to drive posts to the depth they need, so original fences often sit on footings that were never deep enough. After a few heavy rainy seasons, those posts lean and rot at the base.
- Products not rated for local wind loads. Wood and vinyl panels installed without wind-load ratings blow out during storms, and the failure is often block-wide because the same materials and installation methods were used across a row of homes.
- Missing permits and inspection sign-off. When a fence is replaced without the required permit and inspection, the work isn’t documented. That can void an insurance claim or trigger a code violation if the fence is later questioned.
- Uniform lot lines creating block-wide timing. Because The Crossings was built with uniform lot lines, neighbors often need the same fence replaced around the same time, which turns permitting and inspection into a block-wide issue rather than a one-off repair.
Pricing for Fence Installation in The Crossings, FL
Pricing in The Crossings reflects the realities of this community: bedrock that complicates post footings, wind-load requirements that push toward rated materials, and the permit and inspection steps that a compliant job requires. A typical wood privacy fence installation runs in the lead range of $3500 – $9000 for most residential runs. Vinyl falls in the same $3500 – $9000 band, and aluminum runs $4000 – $10000 depending on height, spacing, and gate count. What moves a project up or down that range is run length, post count and depth, gate hardware, and whether the site needs any grading or drainage work. Every price we give is an estimate, and the written estimate sets the final price. Estimates are free, so call (866) 531-4751 for an exact quote for your property.
We Also Serve Cities Near The Crossings
We install fencing and other exterior work throughout the communities around The Crossings. That includes Country Walk, The Hammocks, Kendale Lakes, and Kendall West. If you’re in one of those neighborhoods and you’re weighing a fence replacement or a new install, the same permitting and wind-load standards apply, and we handle them the same way. You can learn more on our fence installation hub page, or call us to talk through your project directly.
Serving The Crossings, FL – Our Local Coverage Area
We serve The Crossings and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fence Installation in The Crossings

Fences in The Crossings need to meet the wind-load requirements that apply to this part of South Florida, which means the specific product and post depth must be rated for the wind exposure at your site. That’s not a one-size number; the required rating depends on your location, fence height, and how exposed the run is. A cheap quote often skips the rating entirely and installs products that aren’t designed for this area’s wind speeds, which is exactly what leads to panel blowouts during storms. Call (866) 531-4751 for an exact quote; estimates are free, and we’ll specify a product that meets what’s required.
Yes, replacing a fence in The Crossings typically requires a permit and inspection sign-off. Most fencing at this scale is permitted work, and skipping the permit creates real problems down the line. Without documentation, an insurance claim can be voided and a code violation can be triggered if the fence is later questioned. We pull the permits and schedule the inspection as part of the job, so your completed fence is properly documented. Call (866) 531-4751 for a free estimate that includes the permitting step.
The high water table and limestone bedrock in The Crossings make proper footing depth difficult, which is why so many original fences here fail early.
When posts can’t be set deep enough or sit in water, they lean and rot after heavy rains. A qualified installer accounts for the site’s soil and drainage before setting posts rather than driving them to a generic depth. This is one of the most common reasons fences in this community fail block-wide at the same time. Call (866) 531-4751 for an exact quote; estimates are free.
A compliant quote in The Crossings should include the permit and inspection, a product rated for the local wind load, and posts set to the depth your site’s soil and exposure require.
A cheap quote frequently leaves out the permit, specifies unrated materials, and sets posts too shallow, which is how it comes in lower. Those shortcuts are exactly what cause early failure and undocumented work. Our written estimates are line-item and fixed, so the scope is clear before work starts. Call (866) 531-4751 to schedule your free estimate.
A properly permitted, wind-load-rated fence can support an insurance claim or premium discussion because the work is documented and the materials meet the standards the insurer expects. Undocumented or unrated fencing does the opposite; it can void a claim when it matters most. That’s why we handle permits and inspection sign-off as part of the job rather than as an optional extra. Call (866) 531-4751 to talk through your project, and we’ll give you a free written estimate.
Whether you’re replacing a leaning 1990s wood fence or installing a new aluminum perimeter, one contractor from the roof to the driveway means you’re not stitching together trades. Tell us your project and we’ll build the roadmap. Call (866) 531-4751 to schedule your free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Kendale Lakes Construction.












