







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Kendale Lakes Homeowners Choose Toto Construction
We provide independent Toto construction, repair and installation service in Kendale Lakes, FL. What makes our Toto work different is the depth of it: we know how Drake flush towers, Ultramax fill valves, Washlet electronic seats and NEOREST smart toilets actually fail in South Florida water and humidity, and we build the bathroom around the fixture instead of working around it. Kendale Lakes Construction is a full-service residential contractor covering seven service lines, and Toto fixtures come up in our bath work across Kendale Lakes constantly. To be clear about who we are: we are an independent Toto service provider and are not affiliated with, authorized by, or endorsed by Toto. For a free estimate, call (866) 531-4751. We answer 24/7.

Why Trust Kendale Lakes Construction for Your Toto Construction?

Our technicians have up to 10 years of experience with Toto fixtures, and that experience shows up in how fast we identify which part has actually failed. A toilet that runs after every flush is almost never a drain problem. It’s a flush tower seal, a flapper, or a fill valve that has scaled up from the mineral content in the water, and the diagnosis matters because it decides whether you spend on parts or on a whole new fixture.
We use genuine Toto fill valves, flush towers, wax rings and Washlet components where the part carries the flush or the electronics. For supply lines, seals and the less critical hardware, we specify quality aftermarket parts that fit the fixture properly. Nothing gets forced. We’re not a Toto dealer and we don’t stock OEM parts, but we know what fits and we install it to spec.
Warranty-safe service matters here. Toto’s own coverage follows the fixture, and careful installation and correct parts protect whatever remains of it. We work with your existing warranty situation rather than around it, and we put the scope in a written line-item quote before anything is touched.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Kendale Lakes
Toto makes a genuinely reliable fixture, which is why so many Kendale Lakes homes still have original Drake toilets from the 1980s doing daily duty. Reliable doesn’t mean immortal. Here are the failures we see most in Kendale Lakes bathrooms, and why they happen.
- Flush tower and flapper wear on Drake and Ultramax models. The silicone seal on a G-Max or Tornado flush tower hardens and loses its edge over years of use, so the toilet loses flush volume or runs continuously. It’s a wear part, not a defect, and it’s the single most common Toto service call we take in Kendale Lakes.
- Washlet seats failing at the inlet filter, pump or control board. Mineral-heavy water and constant humidity take a toll on the small electronic components inside a Washlet C5 or S550e. The seat stops heating, the spray weakens or the unit won’t power on. Sometimes the inlet filter is clogged and a clean fixes it. Sometimes the board is gone.
- Supply-line and fill-valve leaks at the base. A slow leak behind the toilet bowl quietly rots the subfloor and the framing behind your tile. You often don’t see it until the tile starts to move or a dark stain appears at the base. In a 40-plus-year-old CBS home in Kendale Lakes, this is the failure that turns a small repair into a remodel.
- Wax ring and closet-flange failure. Intermittent seepage at the base, a faint sewer smell, or water that shows up only after a long shower usually points to a failed wax ring or a cracked flange. We reset the toilet on a new ring and confirm the flange before the fixture goes back down.
- Seat-hinge and lid cracking on one-piece bowls. Ultramax II and similar one-piece toilets have hinges that take stress over time, and the lid can crack at the mounting point. The bowl is usually fine. Replacing the seat assembly restores the fixture without touching the porcelain.
A Toto Drake that runs for a few seconds after every flush, or won’t fully clear the bowl, usually points to a worn flush tower seal or a fill valve that has scaled up, not a clogged drain line. A qualified local pro pulls the tank, confirms the valve and tower part numbers, replaces the internals, checks the supply stop and shutoff, then verifies the wax ring and flange when there’s any moisture at the base before resetting the toilet on fresh tile. That sequence is what keeps a repair from becoming a tear-out.
Toto Parts & Our Repair-vs-Replace Approach

Toto bowls and tanks are usually worth repairing. Porcelain lasts. What fails is the moving parts inside, and those are replaceable with genuine Toto fill valves, flush towers, wax rings and Washlet components. We don’t stock OEM parts and we’re not a Toto dealer, but we source quality parts that fit the fixture and install them correctly.
Electronic Washlet seats are a different decision. If the pump or control board is shot on a seat that’s already ten years old, rebuilding it rarely makes financial sense, and we’ll say so plainly rather than selling you a repair you’ll regret. On a newer unit, a filter clean or a pump replacement often brings it back fully.
We put the recommendation in writing with the part cost and the labor in the same line-item quote, so you can compare repair against replacement on paper. If you’re not sure which way to go, call (866) 531-4751 and estimates are free. We answer 24/7.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We pull the tank and inspect the flush tower, flapper and fill valve. On a Washlet, we check the inlet filter, pump and control board. On a base leak, we check the wax ring and flange. We tell you what failed and why.
- 2
Repair or install. Genuine Toto internals where the part carries the flush or electronics, quality aftermarket seals and supply lines elsewhere. For a full remodel, we sequence the rough-in and fixture placement before tile so the toilet installs cleanly.
- 3
Test. We run multiple flush cycles and check for seepage at the base, confirm the supply connections hold, and test every Washlet function from the seat controls before we call it done.
- 4
Warranty. We document the parts and labor on the written quote so your Toto warranty stays intact and you have a record of what was done. Questions after the fact go to us, not a call center.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Kendale Lakes

We service and install the full range of Toto fixtures found in Kendale Lakes bathrooms. Two-piece toilets like the Drake (CST743 and CST776) are the most common, followed by one-piece Ultramax II models. Electronic bidet seats like the Washlet C5 and S550e come through our bath work regularly, and we handle integrated NEOREST smart toilets too.
Installation is where Kendale Lakes construction matters. Miami-Dade’s post-Surfside scrutiny and product-approval rules mean every opening in an older CBS home needs a NOA number, and that discipline extends to how a bathroom is sequenced. A Toto fixture installs cleanly when the rough-in is set before tile, not after. We build the room around the fixture so you don’t pay twice.
We Also Service These Brands
We’re multi-brand across seven service lines, so we’re never dependent on one manufacturer. Cabinet work comes through KraftMaid, plumbing and fixtures through Kohler, roofing through GAF, and impact windows and doors through PGT, all alongside our Toto expertise. Real brands, real choices. Whatever fixture or material you’re weighing, we specify the right one for the job and stand behind it.

FAQs – Toto Construction Service in Kendale Lakes
No. We are an independent Toto service provider and are not affiliated with, authorized by, or endorsed by Toto. We service, repair and install Toto fixtures using genuine Toto parts where they matter, and we diagnose the specific unit in front of us rather than following a factory script.
Yes. We use genuine Toto fill valves, flush towers, wax rings and Washlet components where the part carries the flush or electronics, and quality aftermarket supply lines and seals elsewhere. We don’t stock OEM parts and we’re not a dealer, but we source what fits the fixture correctly.
Most flush tower and fill valve repairs finish in a single visit. Washlet electronics take longer to diagnose because the fault could be the filter, pump or board. Full remodels with a new Toto fixture follow the bathroom schedule. Timing varies by scope and jurisdiction, so we set it in the written quote.
Drake two-piece toilets, Ultramax II one-piece toilets, Washlet C5 and S550e electronic bidet seats, and NEOREST integrated smart toilets. We also handle the full bathroom remodeling, tile and fixtures work, and small bathroom remodels that surround these installations in Kendale Lakes.
Careful service with correct parts protects whatever warranty remains on your Toto fixture. We document parts and labor on the written quote so you have a record, and we work with your existing coverage rather than around it.
Renovation costs depend on scope, and the written estimate sets the final price. Typical estimated ranges for the work that surrounds a Toto fixture:
| Service | Typical Estimated Range |
|---|---|
| Full Bathroom Remodeling | $9000 – $28000 |
| Small Bathroom Remodel | $5000 – $12000 |
| Walk-In Shower Installation | $4500 – $12000 |
| Tub-to-Shower Conversion | $3500 – $10000 |
| Bathroom Vanity Installation | $800 – $3000 |
These are estimates, not fixed prices. Call (866) 531-4751 for an exact quote. Estimates are free. We answer 24/7.
A worn flush tower seal or a fill valve that has scaled up, almost always, not a clogged drain line. We pull the tank, confirm the valve and tower part numbers, replace the internals and check the supply stop. Call (866) 531-4751 to book a diagnosis.
It depends on which component failed. A clogged inlet filter or a failed pump is repairable. A control board that’s gone on a ten-year-old seat is usually better replaced than rebuilt, and we say so plainly. Call (866) 531-4751 for an assessment.
Yes. Toto fixtures fit standard US rough-in dimensions and plumbing connections. The real question is sequencing: on a Kendale Lakes remodel, we set the rough-in before tile so the fixture installs cleanly instead of forcing a tear-out. Call (866) 531-4751 to plan it.
Yes, it usually means a failed wax ring or cracked closet flange, and the moisture is rotting subfloor and framing behind the tile. It’s worth addressing before it spreads. Call (866) 531-4751 and we’ll check the flange and reset the fixture.
It needs a dedicated power source at the fixture location and the rough-in set correctly before tile. We plan both into the bathroom scope from the start so the NEOREST or Washlet installs cleanly. Call (866) 531-4751 to walk through your layout.
Book Your Toto Service in Kendale Lakes, FL
Whether it’s a running Drake, a Washlet that won’t heat, or a full bathroom remodel built around a Toto fixture, Kendale Lakes Construction is one contractor from the roof to the driveway. Tell us your project and we’ll build the roadmap. Call (866) 531-4751. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Kendale Lakes Construction.












